Indiana Arm Bar-quette

Linear arm bar-quette, includes padded-box seat using high-density flame retardant foam and a waterfall back. Fully upholstered inside back, outside back and arms with piping at the seat perimeter. Solid maple wood legss and standard nylon nail-in glides. Available in Pavar’s standard stain color options (water based) and a 35° sheen top-coat lacquer.

Specs

Height	54"
Seat height	31"
Width	30", 48", 60", 72", 96"
Seat width	24", 42", 54", 66", 90"
Depth	26"
Seat depth	17"
Arm height	46"
Inside arm width	24", 42", 54", 66", 90"
Yardage	14 yds, 18 yds, 22 yds, 26 yds, 30 yds

Finishes

STANDARD WIPING STAINS

Hand-Applied, Exposure of Wood Grain.

A wiping stain finish is achieved by over-applying the stain color and then wiping it off before it dries. It achieves a finish that is far more natural in appearance than standard spray stains.

A wiping stain showcases the wood grain and celebrates the natural variations in wood tones.

*Custom stain matches are available upon request.

Wild Cherry Wiping

PAV-207

Nocello Wiping

PAV-240

Crema Wiping

PAV-243

Walnut Wiping

PAV-252

Black Wiping

PAV-258

Wenge Wiping

PAV-298

STANDARD SPRAY STAINS

Uniform, Even Stain Application.

Standard stain finishes are achieved through a steady and evenly applied stain using spray stain guns. In contrast to a wiping stain, the spray stain is left to dry and provides more coverage to the wood grain. Darker stain finishes tend to soften the look of the wood grain.

*Custom stain matches are available upon request.

Natural *incurs surcharge*

PAV-000

Mahogany

PAV-001

Medium Walnut

PAV-004

Cherry

PAV-006

Brandy

PAV-011

Bole Brown

PAV-040

Black

PAV-058

Mocha

PAV-062

Light Cherry

PAV-067

Dark Walnut

PAV-068

Wenge

PAV-098

Honey

PAV-112

DISTRESSED FINISH

Aged & Weathered.

To distress the finish, the sander is used on the surface of the furniture, once the paint has dried.

With an emphasis on the edges, a gentle sanding distresses the paint and lacquer allowing the
underlying base color and/or raw wood to show through.

Distressed

Inside Back Distressed

Back Panel Distressed

Front Leg Distressed

ANTIQUE FINISH

Scratches, Notches, and Dents.

An antique finish is a process by which we notch, dent, and strike the wood to give the appearance of an aged piece of furniture, adding depth and character.

IMPORTANT NOTE:

Variation of the color tone and texture is unavoidable when viewing a computer image.
Due to natural variations in wood, the actual grain and finish may vary slightly.
For maintenance, dust or wipe with a damp clean cloth, using water only.

Antique

Back Leg Antiqued

Front Seat Rail Antiqued

Back Rails Antiqued

NAILHEAD COLORS

Nailheads are individually, hand-applied. Pavar’s standard ½” diameter nailheads are an available option on most models.

(Natural spacing shown in nailhead images)

Natural Dark

1⁄2” Diameter

PAV-1009-01

Pewter

1⁄2” Diameter

PAV-1009-10

Nickel

1⁄2” Diameter

PAV-1009-13

Bronze Renaissance

1⁄2” Diameter

PAV-1009-14

Brass Plated

1⁄2” Diameter

PAV-1009-19

French Natural

1⁄2” Diameter

PAV-1009-21

NAILHEAD SPACING

Pavar allows for flexibility in the spacing application of nailheads.

Standard spacing is 1″ center-to-center.

Natural spacing is available upon request and incurs a surcharge.

IMPORTANT NOTE:

Variation of the color tone and texture is unavoidable when viewing a computer image.

1" Center-to-Center

Natural *incurs surcharge*

L-SHAPPED GUARDRAILS

CHROME L-SHAPED – included, standard option.

A chrome L-shaped guardrail is included on the front stretcher for all barstools and ADA stools.
Brass and black L-shaped guardrails are available and will incur a surcharge.

The option to install guardrails on the back and side stretchers is available and will incur a surcharge.

Custom guardrail finishes are available upon request and will incur a surcharge and longer lead-times.

IMPORTANT NOTE:

Variation of the color tone and texture is unavoidable when viewing a computer image.

BLACK

BRASS

CHROME

NYLON GLIDES – included, standard option.
Nylon glides are included on all models and are for use on most flooring surfaces.

METAL GLIDES – available option, incurs a surcharge.
Metal glides are for use on carpet flooring only and will incur a surcharge.

FELT GLIDES – available option, incurs a surcharge.
Felt glides are for use on wood flooring only and will incur a surcharge.

NYLON GLIDES

METAL GLIDES

FELT GLIDES

VINYL – CHALLENGER

These featured selections are Grade 1. Pavar cannot warranty the performance of the options listed below.

Customer’s Own Material (COM) is another option.

High resistance cleaning – bleach friendly.

Challenger has the soft feel of leather and demonstrates both durability and strength.

COLORS: 40 available
ABRASION: 1,500,000 Double Rubs
CONTENT: 100% Polyvinyl Chloride (PVC)
BACKING CONTENT: 100% Polyester
CLEANING INSTRUCTIONS: Bleach-friendly, dilution ratios must be followed. Most stains can be cleaned with mild soap and water. Always rinse with fresh water to remove residue and wipe dry with a clean cloth.

GARNET 17

MEADOW 21

DEEP TEAL 24

LAGOON 31

ROYAL 35

PUMPKIN SPICE 44

TAN 83

DOVE 91

SLATE 97

CHARCOAL 98

MOCHA 802

AMBER 804

SEAGULL 902

FOG 903

STEEL 905

RAVEN 909

WOVEN FABRIC – LOUIS

Louis has the appearance of a basket weave woven texture that is timeless in style.

COLORS: 18 available
ABRASION: 440,000 Double Rubs
CONTENT: 100% Polyester
BACKING CONTENT: 100% Acrylic Kiss Coat
CLEANING INSTRUCTIONS: Clean fabrics with water-based cleaning agents

CRASHING BLUE 31

TEAL MIX 37

APRICOT 41

MINERAL MIX 77

WIND 93

GAINSBORO 902

DOMINOS 908

DENIM BLUE 3003

GOLD TWIST 5009

SNOW 6003

BLUE WASH 7003

DIM GREY 9003

VELVET – FRANKLIN 2nd EDITION

Franklin has a velvet-look texture and brings a sense of sophistication and luxury to any design.

COLORS: 28 available
ABRASION: 235,000** Double Rubs
CONTENT: 100% Polyester
BACKING CONTENT:100% Polyester
CLEANING INSTRUCTIONS: Clean with water-based cleaning agents only, do not use Solvent cleaners.

IMPORTANT NOTE: